Connection
The
Connection
Settings
page (see figure 64) allows configuration of parameters related
to the LAN (Ethernet) and serial ports. Adjust the settings for the Ethernet connection for the
SMD 101, remap the network ports, adjust settings for the RS-232 port, and set up SNMP.
60'2&%(%
Figure 64.
Connection Settings Page
Ethernet Settings Panel
This panel provides basic Ethernet configuration including:
•
Use DHCP
— Click the checkbox to enable DHCP. When enabled, the IP Address,
Subnet Mask, Default Gateway, and DNS Server fields are grayed out, but show the
DHCP assigned values.
•
IP Address:
— Under DHCP control, this field displays the assigned IP address.
Otherwise, enter a static IP address here. The default IP address is: 192.168.254.254.
•
Subnet Mask:
— Under DHCP control, this field displays the assigned Subnet Mask
(default 255.255.0.0). Otherwise, enter a mask here.
•
Default Gateway:
— Under DHCP control, this field displays the assigned gateway
IP address, otherwise enter the correct static gateway IP address here. The default
gateway address is (0.0.0.0).
•
DNS Server:
— Under DHCP control, this field displays the assigned DNS Server
address.
•
Host Name:
— Enter a name for the device here. The name assists identification.
figure 64
SMD 101 • Web-based User Interface
67
Summary of Contents for SMD 101
Page 2: ......
