MTPX Plus Series Setup Guide • Remote Control and Optimizing the Video
30
Loading the Start-up Page
NOTE:
•
If your Ethernet connection to the matrix switcher is unstable, try turning off the
proxy server in your Web browser.
1.
In Microsoft Internet Explorer, click
Tools > Internet Options >
Connections > LAN Settings
.
2.
Clear the
Use a proxy server...
checkbox.
3.
Click
OK
.
•
For details on operating the switcher via HTML pages, see the
MTPX Plus User
Manual
.
1.
Start the Web browser program.
2.
Click in the browser
Address
field.
3.
Enter the Matrix IP address in the browser
Address
field.
NOTE:
192.168.254.254 is the factory-specified default value for this field.
4.
Press <
Enter
>.
The switcher checks to see if it is password protected.
NOTE:
The factory configured passwords for all accounts on this device have been
set to the device serial number. Passwords are case sensitive.
If the device is reset, the password will revert to the original password
configuration, which is no password.
If the switcher is not password protected
, it checks and downloads the HTML
start-up page. The switcher is ready for operation via HTML remote control.
If the switcher is password protected
, it downloads the
Enter Network
Password
page.
NOTE:
A user name entry is not required.
5.
Enter the appropriate administrator or user password in the
Password
field.
6.
Click
OK
.
7.
The switcher downloads the HTML start-up page.
The switcher is ready for operation via HTML remote control.
Summary of Contents for MTPX 3232
Page 6: ......
