Extron electronics MTPX 3232, Setup Manual

Page: 17 / 39

MTPX Plus Series Setup Guide • Front Panel Operation 9
Front Panel
Operation
The topics covered in this section are:
•
Creating a Tie
• Saving or Recalling a Preset
• Setting the Front Panel Locks (Executive Modes)
• Defining the Audio/RS-232 Wire Pair and Configuring the Remote Port
•
Viewing and Adjusting the Audio Level
• Viewing Ties and Muting Outputs
• Video Adjustments
The key shown at right applies to all drawings in this chapter.
Creating a Tie
A tie is an input-to-output connection.
A set of ties is an input tied to two or more outputs. (An output can never be tied to more
than one input.)
A
configuration is one or more ties, one or more sets of ties, or a combination.
1. Press and release the ESC button to clear any input button, output button, or control
button indicators that may be lit.
2. Press and release the VIDEO and/or AUDIO I/O buttons to select or deselect video
and/or audio as desired.
Green when selected
Off when deselected
Red
when selected
Off when deselected
I / O
VIDEO AUDIO
NOTE: Audio (RS-232) or video can be broken away (tied by itself) by selecting only
the VIDEO button or only the AUDIO button.
3. Press and release the desired INPUT button.
5
The button lights to indicate the selection.
4. Press and release the desired OUTPUT buttons.
3 4
ENTER
8
Amber indicates video and audio tie.
Green indicates video only tie.
Red
indicates
audio
only tie.
Green indicates the
need to confirm the
change.
5. Press and release the Enter button.
All button indicators turn off.