MTPX Plus Series Setup Guide • Front Panel Operation
10
Saving or Recalling a Preset
A
preset
is a configuration that has been stored.
1.
Save a preset
— Press and hold the
PRESET
button until it flashes.
Recall a preset
— Press and release the
PRESET
button.
PRESET
PRESET
PRESET
PRESET
Preset button blinks.
Press and
hold
.
2 seconds
Save a
preset
Recall a
preset
Preset button lights.
Press and release.
All input and output buttons with
assigned presets light
red
.
The configuration data at assigned
preset locations will be overwritten
.
INPUTS
1 2 3 4 5 6 7
7
7
7
7
7
7
7
7
7
7
7
7
2.
Press and release the desired
INPUT
or
OUTPUT
button.
1
ENTER
The button blinks
red
to indicate that
this
preset
is selected to save or recall.
The Enter button blinks
red
to indicate the need to
activate the save or recall.
3.
Press and release the
ENTER
button.
Setting the Front Panel Locks (Executive Modes)
The matrix switcher has three levels of front panel security lock that limit the operation of the
switcher from the front panel. The three levels are:
•
Lock mode 0
— The front panel is completely unlocked.
•
Lock mode 1
— All changes are locked from the front panel (except for setting Lock
mode 2). Some functions can be viewed.
•
Lock mode 2
— Basic functions are unlocked. Advanced functions are locked and can
be viewed only.
Basic
functions consist of:
•
Making ties
•
Saving and recalling presets
•
Setting input audio gain and attenuation
•
Changing Lock modes
Advanced
functions consist of:
•
Setting audio output mutes
•
Setting audio output volume
•
Setting audio/RS-232 wire pair and front panel configuration
NOTE:
The switcher is shipped from the factory in Lock mode 2.
Summary of Contents for MTPX 3232
Page 6: ......
