Extron electronics MTPX 3232, Setup Manual

Page: 21 / 39

MTPX Plus Series Setup Guide • Front Panel Operation 13
Viewing and Adjusting the Audio Level
NOTE: Volume can be adjusted for the local outputs only.
1. Press and hold the AUDIO button until it flashes.
AUDIO AUDIO
Audio button blinks. Press and
hold.
2 seconds
2. Press an INPUT or OUTPUT button (see the
MTPX Plus User Manual
to see the
displayed value).
17 18
1 2
5
Press an
Input button
to adjust
gain/attenuation
.
Press an Output button to adjust volume .
Output buttons display gain/attenuation .
Input buttons display volume .
1 Lit button Unlit button 1
3. Increase/decrease the level or volume by pressing the ESC (
>
) and VIEW (
<
) buttons.
ESC VIEW
button decreases
the level or volume. button increases
the level or volume.
4. Press and release the AUDIO button to exit.
Viewing Ties and Muting Outputs
1. Press the AUDIO button.
OUTPUT buttons light for outputs that have no ties established.
NOTE:
If an OUTPUT button blinks, that output is muted. To toggle mute on and off,
press and hold the output button for 2 seconds.
2. Press an INPUT button.
The buttons for all tied outputs light (amber for VIDEO and AUDIO , green for VIDEO
only, and red for AUDIO only).
3. Press an OUTPUT button.
The buttons for the tied input and all tied outputs light.
4. Press the VIEW button.
All input and output buttons return to an unlit state.
Video Adjustments
Image adjustments are available via SIS commands, the Windows-based control and
configuration program, and the built-in HTML pages (see
Remote Control and Optimizing
the Video on page 14).