MKP 3000 Remote Control Panel • Reference Information
MKP 3000 Remote Control Panel • Reference Information
Reference Information, cont’d
Figure A-2 shows the dimensions for cutting a hole to
accommodate the keypad circuit board for mounting an
MKP 3000 MAAP on a flat surface.
V
O
LUME
I/O
4.5"
(11.43 cm)
T
o
install
MKP 3000 MAAP
directl
y into furniture
,
cut alon
g
this line
.
T
o
p P
anel
6.4
"
(16.26 cm)
Location of Circuit Board Bo
x
2.75"
(7.0 cm)
5.4"
(13.7 cm)
SURF
A
CE CUT
-OUT AREA
FOR FURNITURE MOUNT
Figure A-2 — MKP 3000 MAAP panel mount cutout
template
A-7
Mounting and Cabling Specifications
Electrical box cutout
Any standard box that meets the local electrical codes can be
used, but boxes from different manufacturers may have
different size openings. Extron recommends testing the fit of
the MKP inside the electrical box and then placing the box flush
against the mounting surface and tracing the cutout area.
Panel mount cutout templates
Figure A-1 shows the dimensions for cutting a hole to
accommodate the keypad circuit board for mounting an
MKP 3000 on a flat surface. This type of installation can include
a desk or podium, or a control panel or dashboard, where the
back is protected and does not require an electrical box.
MKP 3000
VOLUME
I/O
2.63
"
(6.68 cm)
3.38
"
(8.59 cm)
Full Size
Circuit Board Box
(behind front panel)
Cut-out area should be slightly
larger.
Figure A-1 — MKP 3000 panel mount cutout template
A-6
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203