MKP 3000 Remote Control Panel • Local Operation
MKP 3000 Remote Control Panel • Local Operation
Local Operation
3
Output/View button —
Selects an output or places the MKP in
view mode.
4
Take button —
Takes (activates) a new tie or preset. This button
is the equivalent of the Enter button on the matrix switcher’s
front panel.
5
Select knob —
This knob, when rotated, scrolls through the
available inputs, outputs, or presets. It also ramps volume up
or down, depending on which of buttons
2
and
3
and which
operating mode are selected. The inputs, outputs, presets, or
volume level are shown in the LCD display (
6
).
When the connected switcher has a large matrix size (up
to 128 by 128) selecting an input or output number by
rotating the Select knob can be inconvenient. An
optional MKP 10 MAAP keypad allows rapid input/
output selection.
6
Input/Output (I/O) (video/audio) selection button
—
Press the
I/O button to select video and audio, video only, or audio only
for the current input and output selections. As you cycle
through the selections, the button lights amber for video and
audio, green for video only, and red for audio only. This button
also selects audio volume mode.
Front Panel Operations
The MKP 3000 normally operates in the matrix input/output
selection mode. This is the default mode, in which you can set
up a tentative tie by selecting an input, selecting an output, and
then taking (commanding) the tie. The MKP 3000 can also
operate in input-only mode, in which you can view the current
ties by scrolling the outputs. In this mode, you first select an
output, then complete the tie by selecting an input.
Additionally, the MKP can operate in preset mode (select
presets), view mode (view ties without changing them), audio
volume mode (adjust the audio output volume), or setup mode
(set the IP addresses and other parameters).
The MKP is provided with default labels installed in the front
panel buttons (figure 3-2). It also includes a strip of alternative
labels that you can insert in one or more of the mode selection
buttons to make using the other modes more clear. These
additional button labels are shown in the applicable front panel
operation descriptions. See “Changing Button Labels” in
appendix A, “Reference Information,” for the procedure for
replacing these button labels.
3-3
3-2
Front Panel Controls and Indications
I / O
SELECT
Extron
MKP 3000
INPUT TAKE
OUTPUT
VIDEO
GREEN
AUDIO
RED
2
4
3
1
5
6
Figure 3-1 — MKP 3000 controls and indicators
The MKP 3000 MAAP has the same controls and
indicators.
The buttons on this panel perform different functions,
depending on the MKP’s operating mode. See “Front Panel
Operations” for a more detailed description of the modes.
The labels in these buttons can be removed and replaced to
reflect the function of the button. A sheet of labels is provided
with the MKP. See “Changing Button Labels” in appendix A,
“Reference Information,” for the procedure for changing these
labels.
1
LCD display —
Shows the input, output, preset name and
number, or volume level during operation. In certain modes, it
can also show the various IP addresses programmed into the
MKP.
The LCD display shows the most recent input, output, or
preset name and number entered. Ties created using
other devices (other MKPs, a PC or control system, or
the matrix switcher’s front panel) are not shown in the
LCD display.
2
Input/Preset button —
Selects an input or placees the MKP in
preset mode.
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203