4.
Write down your current IP address and subnet mask below. If your PC is set to
Obtain
an
IP
address
automatically
, make a note of that, instead.
IP Address:
. . .
Subnet Mask:
. . .
5.
Click
Specify an IP address
or
Use the following IP address
(depending
on your operating system) and leave the default gateway blank. Enter the following
values:
•
IP Address:
192.168.254.253
•
Subnet Mask:
255.255.0.0
6.
Save the changes and exit the network setup.
7.
Reboot the PC, if required, for the changes to become effective.
8.
Launch your web browser (Internet Explorer), and type
http://192.168.254.254/index.html
in the
Address
field of the browser.
The IPL T CR48 default web page is displayed. See
on page 13 for more information on configuring your unit).
9.
After configuring your IPL T CR48, repeat steps
3
and
4
to change your TCP/IP settings
back to their original configuration.
Firmware upgrades
Firmware upgrades become available as improvements are made to the versatility and
functionality of the IPL T CR48. These upgrade are available for download from at
(see
on page 21 for more information on
upgrading the firmware).
IPL T CR48 • Connection and Configuration
15
