•
Built-in multi-level security
—
You can control the access to devices attached to the
unit. Two levels of password protection provide appropriate security.
NOTE:
The factory configured passwords for all accounts on this device have been
set to the device serial number. In the event of a reset to factory defaults, the
passwords revert to no password (see
Setting and changing passwords
page 19 to change a password).
•
Contact closure input ports
—
Can be used to sense when a switch or relay has
been activated
•
Supports Ethernet device drivers
—
Allows for control of up to six Ethernet-enabled
AV devices
NOTE:
Ethernet driver support requires Global Configurator 3.0 and firmware
version 1.15 or higher.
•
Easily connected
—
Provides RJ-45 auto-sense 10/100 Mbps Ethernet LAN
connection
•
Easily configured and controlled
—
•
Using a standard web browser (Microsoft
®
Internet Explorer
®
version 6.0 or higher)
and web-based interface
•
Using a standard Telnet client application
•
Requires no centralized processor to operate within a system
•
Choice of mounting options
—
The controller can be mounted near a screen or
projector lift or on a rack shelf
•
Remote management
—
The IPL T CR48 allows you to remotely activate and
deactivate projector lifts, screens, and lighting systems.
•
Multiple protocols supported
—
The IPL T CR48 supports Telnet, SMTP, ICMP, ARP,
and DHCP.
IPL T CR48 • Introduction
2
