IN1606 and IN1608 Series Scaling Presentation Switcher • Internal Web Pages
71
Group Controls panel
1.
For the
Mic Volume
and
Program Volume
sliders, click and drag the limiters of the
sliders to set minimum and maximum volume limits.
2.
Click and drag the handle of the
Mic Volume
and
Program Volume
slider, or enter a
value in the field below the sliders or click the
Up
or
Down
arrow button.
Click the
Mute
button to mute the audio source.
3.
For the
Bass
and
Treble
sliders, click and drag the limiters of the sliders to set
minimum and maximum limits.
4.
Click and drag the handle of the
Bass
and
Treble
slider, or enter a value in the field
below the sliders or click the
Up
or
Down
arrow button. The default frequency for bass is
100 Hz. The default frequency is 8 kHz.
Also known as shelving or tone controls, bass and treble filters provide the ability to
cut or boost gain linearly above or below a selected frequency. Set either slider to
0
to
bypass the filter.
5.
Click the
Configure Groups
button in the Group Controls panel. The Configure
Groups window opens.
There are eight preconfigured group masters to perform audio configuration.
Figure 47.
Configure Groups Window
Each group contains several group members which can be added or removed from a
group. Selecting members applies audio configurations made to the group master to
the selected group members (see Group Controls panel above or the
Output tab
on
page 73 to adjust group masters).
6.
From the
Members
drop-down menu, select the desired members check box (see the
table on the next page for a list of available group members per group masters).
7.
Click the
Close
button.
