Extron electronics IN1606 User Manual Download Page 59

Page: 59 / 95

IN1606 and IN1608 Series Scaling Presentation Switcher • Configuration Software

Connect

This option connects a device tab in emulation mode to a
device. The page goes from emulation mode to live mode.
Current device settings are displayed. The tab indicator
changes from gray (not connected) to green (connected).

NOTE:

If a device is already connected, the

Connect

option is disabled until the device is disconnected or
the connection times out.

From the

Connections

menu, select

Connect

. The

Connection Settings window opens (shown at right).

Select the connection method from the list of radio
buttons.

•

Select the

TCP/IP

radio button if the device is connected to the host device

through a LAN or WAN.
Enter the device IP address or hostname in the

IP Address

field. If the device is

password-protected, enter the password in the

Password

field.

•

Select the

RS-232

radio button if the device is connected to the host device

through an RS-232 connection.
Select the desired values from the

COM Port

and

Baud Rate

drop-down menus.

NOTE:

The default baud rate is 9600 baud.

•

Select the

USB

radio button if the device is connected to the host device through

the front panel mini-USB connector. Select the device from the list of devices.

Click the

button to connect to the device.

Disconnect

This option disconnects the PCS program from the connected device and returns it to
emulation mode.
From the

Connections

menu, select

Disconnect

. The scaler tab enters Emulation mode.

NOTE:

If a device is already disconnected, the

Disconnect

option is disabled until the

device is connected.

Exit

This option disconnects the scaler from the software and closes the application.
From the

Connections

menu, select

Exit

. The application closes.

Summary of Contents for IN1606
































































































Search results

Summary of Contents for IN1606

Reviews:

Related manuals for IN1606

Brands by name

Popular brands

Extron electronics IN1606, User Manual

Search results

Summary of Contents for IN1606

Reviews:

Related manuals for IN1606

Brands by name

Popular brands