Å
Output connector
— F
or all one‑way video, audio, and serial communications
output to a receiver, connect a fiber optic cable to the Output LC connector (see
figure 7
, on the previous page).
Connect the far end of this fiber optic cable to the Optical Rx connector on a
FOXBOX Rx receiver or to any other compatible fiber optic device.
NOTES
:
•
For a FOX 500 receiver, connect this fiber optic cable to the Optical 1 LC
connector.
•
Alternatively
, for the serial return, (receiver‑to‑transmitter) function,
connect the far end to the Optical RX or Optical 2 connector on a transmitter.
Output LED
— See “Fiber optic I/O board LED indications,“ below.
Fiber optic I/O board LED indications
On the fiber optic I/O boards, the input and output LEDs on the transceivers provide useful
indications of the status of the lasers and the reclocking function. See the table below.
OUT
IN
Definition
Output LED
indication
Input LED
indication
Definition
Reclocked at 4.25 Gbps
On
On
Reclocked at 4.25 Gbps
Not reclocked, laser off, or
no signal
Off
Off
Not reclocked or no signal
Non‑4G signal present or
not reclocked
Fast blink
Fast blink
Non‑4G signal present or
not reclocked
NOTE:
If the reclocking feature is set to bypass mode, the output LED is always on.
3G/HD/SD-SDI boards
MUTI-RATE SDI INPUTS
H
G
A
D
E
F
C
B
MUTI-RATE SDI OUTPUTS
H
G
D
E
F
C
A
B
2b
2b
2b
2b
2b
2b
2b
2b
2a
2a
2a
2a
2a
2a
2a
2a
Figure 8.
3G/HD/SD-SDI Board
b
BNC board with connectors
(see
figure 3
on page 8 and
figure 4
on page 9)
—
Ç
Multi-rate SDI Input connectors
— Con
nect HD‑SDI, SDI, or 3G‑SDI video
inputs to these BNC connectors.
É
Multi-rate SDI Output connectors
— Conn
ect digital displays to these BNC
connectors.
FOX Matrix 3200 and 7200 Switchers • Installation
12
Summary of Contents for FOX Matrix 3200
Page 6: ......
