Tools menu
•
Assign
Device
Icons
—
Displays the complete set of
input and output device icons. You can drag any of these
icons to the input and output boxes.
•
Edit
Device
Palette
—
Allows you to add your own
device icon graphics.
•
Mute-Outputs
settings
—
Displays the Mute Adjust
window, from which you can mute each output.
•
FOX
Re-clocker
settings
—
Displays the FOX
Reclocking Rate Settings window, from which you can
select the reclocking rate for one or all outputs and mute
and unmute the output.
•
View
Input
Frequencies
—
Displays the Input
Detection window, which shows the data rates for SDI
and HD‑SDI inputs only. This selection is not available if
no BNC 3G/HD/SD‑SDI boards are installed.
•
Update
Firmware
...
—
Allows you to replace the
firmware that is coded on the control board of the switcher without taking the switcher
out of service (see
Updating the firmware
on page 80).
•
IP
Options
—
Allows you to set IP options (see
IP Settings/Options window
on
page 76).
•
HTML
File
Manager
—
Displays a list of HTML files installed on the switcher and
allows you to upload custom files from a PC connected to the switcher (see
Uploading
HTML files
on page 84).
•
Hardware
Status
—
Provides an overall view of the status of the matrix
switcher, including the power supply voltages, the temperature status, the
Remote RS‑232/RS‑422 port configuration, and the installed and updated firmware
status (see figure 44).
Proper operation.
Component has failed.
Figure 44.
Status Window
FOX Matrix 3200 and 7200 Switchers • Matrix Software
86
Summary of Contents for FOX Matrix 3200
Page 6: ......
