5.
Select
Fiber
Matrix
as the Matrix Model,
3200
or
7200
as the Default Size, and either
singlemode
or
multimode
for each board installed (see figure 49). Click
OK
.
Figure 49.
Emulate Mode Configuration
6.
Continue using the program as described in the
Using the Matrix Switcher Control
Software
, steps 1 through 3, starting on page 73).
Using the Help System
For information about program features, you can access the help program in any of the
following ways:
•
From the Extron Electronics program folder or group, double‑click the
MATRIX Switcher Help icon (shown at right).
•
From within the Matrix Switcher Control Program, click
Help
>
Contents
on
the menu bar.
•
From within the Matrix Switcher Control Program, press the <F1> key.
FOX Matrix 3200 and 7200 Switchers • Matrix Software
90
Summary of Contents for FOX Matrix 3200
Page 6: ......
