DXP HD 4K Series • Introduction
1
Introduction
•
•
About the DXP HD 4K Series Matrix Switchers
•
NOTE:
For more information on any subject in this guide,
see the
DXP HD 4K Series User Guide
, available at
About this Guide
This setup guide allows you to easily and quickly set up and
configure your DXP matrix switcher. Step by step instructions
show you how to connect the hardware and to perform basic
operations using both the front panel controls and selected Simple
Instruction Set (SIS) commands. The guide also shows you how
to load and start up the Product Configuration Software (PCS) and
how to connect to the built-in HTML pages, which you can use to
operate the switcher.
The terms "DXP," "switcher," and "DXP switcher" are used
interchangeably in this guide to refer to all DXP HD 4K models.
About the DXP HD 4K Series Matrix Switchers
The Extron DXP HD 4K series are digital matrix switchers that
route HDMI signals from multiple sources to any or all of up to 16
HDMI-equipped display devices. All DXP matrix switchers support
resolutions of up to 4K, including 1080p @ 60 Hz Deep Color, and
are HDCP 1.4 compliant, enabling simultaneous distribution of a
single source signal to one or more compliant displays.
The following matrix sizes are available:
DXP 88 Series:
•
DXP 44 HD 4K
— 4 inputs by 4 outputs
•
DXP 84 HD 4K
— 8 inputs by 4 outputs
•
DXP 88 HD 4K
— 8 inputs by 8 outputs
DXP 1616 Series:
•
DXP 168 HD 4K
— 16 inputs by 8 outputs
•
DXP 1616 HD 4K
— 16 inputs by 16 outputs
