47
DXP HD 4K Series • Remote Control
NOTE:
If you want to save the installation file to your
computer hard drive to run later, click
Save
. On the
Save
As
window that opens, save the setup file to the desired
location. When you are ready to install the software,
double-click on the
pcss_v
n
x
n
x
n
.exe
icon, click
Run
on the
File
Download
–
Security
Warning
dialog
box that opens, and restart this procedure at step 7.
If, instead, you see a
Download
icon at the bottom of the page,
wait until the icon displays the name
pcss_v
n
x
n
x
n
.exe
, then
click it.
6.
On the next window that opens, click
Run
to start the
installation process.
7.
Follow the instructions on the
InstallShield
Wizard
screens to complete the software program installation. By
default the installation creates a folder called “Extron PCS” in
one of the following locations on the computer (depending on
the Windows version):
c:\Program
Files
(x86)\Extron\Extron
PCS
or
c:\Program
Files\Extron\Extron
PCS
If there is not already an Extron folder in your Program Files or
Program Files x86 folder, the installation program creates it as
well.
Starting the Configuration Program
1.
Ensure that your DXP HD 4K is connected to your computer via
USB (front panel Config port) or TCP/IP (rear panel LAN port).
2.
To run the PCS configuration program, do either of the
following:
•
Double-click on the EAF.exe file, located on your computer
at
c:\Program
Files
[or
Program
Files(x86)]\
Extron\Extron
PCS.
•
Access the program from the
Start
menu on your
computer as follows:
a.
Click
Start
on your computer screen.
b.
Select
All
Programs
from the
Start
menu.
c.
From the All Programs menu, select
Extron
Electronics
.
d.
From the
Extron
Electronics
drop-down submenu,
select the
Extron
Product
Configuration
Software
folder.
e.
From the folder submenu, select
Extron
Product
Configuration
Software
. The
Extron
Product
Configuration
Software
window opens.
