Extron electronics DXP HD 4K Series Setup Manual Download Page 25

Page: 25 / 60

DXP HD 4K Series • Operation

Press the desired input button.

The button lights to
indicate the selection.

DXP 168 and 1616

DXP 44, 84, and 88

The LED lights to
indicate the selection.

Figure 14.

Selecting an Input for the Tie

Press the output buttons to which the input will be tied.

DXP 44, 84, and 88:

Green

indicates a video-only tie.

Red

indicates an audio-only tie (de-embedded audio outputs 1 and 2).

Blinking green

indicates the

need to confirm the change.

ENTER

Figure 15.

Selecting an Output for the Tie (DXP 88 Series)

DXP 168 and 1616:

ENTER

2 4

Amber

indicates a video and audio tie (de-embedded audio outputs 1-4).

Green

indicates a video-only tie.

Red

indicates an audio-only tie (de-embedded audio outputs 1-4).

Blinking

green

indicates the

need to confirm the change.

Figure 16.

Selecting an Output for a Tie (DXP 1616 Series)

Press the

Enter

button. All button indicators become unlit.

Summary of Contents for DXP HD 4K Series





























































Search results

Summary of Contents for DXP HD 4K Series

Reviews:

Related manuals for DXP HD 4K Series

Brands by name

Popular brands

Extron electronics DXP HD 4K Series, Setup Manual

Search results

Summary of Contents for DXP HD 4K Series

Reviews:

Related manuals for DXP HD 4K Series

Brands by name

Popular brands