Extron electronics DXP HD 4K Series Setup Manual Download Page 28

Page: 28 / 60

DXP HD 4K Series • Operation

Locking and Unlocking the Front Panel (Executive Mode)

The DXP switcher has three levels of security lock that limit the
operation of the switcher from the front panel:

•

Lock mode 0

— The front panel is completely unlocked.

•

Lock mode

— All changes are locked from the front panel

(except for setting lock mode 2). Some functions can be
viewed.

•

Lock mode 2

— Basic functions are unlocked. Advanced

functions, such as setting video and audio mute, are locked
and can be viewed only.

•

Basic

functions consist of:

•

Making ties

•

Saving and recalling presets

•

Changing lock modes

•

Advanced

features consist of:

•

Setting video and audio output mutes

•

Setting the RS-232 port baud rate

NOTE:

The switcher is shipped from the factory in lock

mode 2.

Selecting Front Panel Lock Mode 2 or Toggling between
Lock Modes 2 and 0

NOTES:

•

If the switcher is in lock mode 0 or 1, this procedure selects
mode 2.

•

If the switcher is in lock mode 2, this procedure selects
mode 0 (unlocks the switcher).

DXP 44, 84, and 88:

Toggle the front panel lock on and off by pressing and holding the

Enter

I/O

, and

Esc

buttons simultaneously until the following

LEDs blink twice (approximately 3 seconds).

•

If the DXP is now in lock mode

, the Esc, Video, and Audio

LEDs blink twice.

•

If the DXP is now in lock mode

, the Video and Audio LEDs

blink twice.

Summary of Contents for DXP HD 4K Series





























































Search results

Summary of Contents for DXP HD 4K Series

Reviews:

Related manuals for DXP HD 4K Series

Brands by name

Popular brands

Extron electronics DXP HD 4K Series, Setup Manual

Search results

Summary of Contents for DXP HD 4K Series

Reviews:

Related manuals for DXP HD 4K Series

Brands by name

Popular brands