Extron electronics DXP HD 4K Series Setup Manual Download Page 30

Page: 30 / 60

DXP HD 4K Series • Operation

Selecting Front Panel Lock Mode 2 or Toggling between
Lock Modes 2 and 1

NOTES:

•

If the switcher is in lock mode 1, this procedure selects
mode 2.

•

If the switcher is in lock mode 2, this selects mode 1 (locks
all switcher functions except selecting mode 2).

Toggle the lock on and off by pressing and holding the

Video

and

Audio

buttons until the following buttons blink twice

(approximately 3 seconds).

•

If the DXP is now in lock mode

, the

Esc

Video

, and

Audio

buttons or LEDs blink twice.

•

If the DXP is now in lock mode

, the

Video

and

Audio

buttons or LEDs blink twice.

I / O

Press and

hold

simultaneously.

The buttons blink twice.
Release the buttons.

2 seconds

VIDEO

I/O

ESC

Press and

hold

simultaneously.

3 seconds

I/O

VIDEO

AUDIO

The LEDs blink twice.
Release the buttons.

DXP 168 and 1616

DXP 44, 84, and 88

AUDIO

Figure 23.

Press and Hold the Two I/O Buttons Simultaneously

NOTE:

To switch from lock mode 1 (front panel is completely

locked) to lock mode 0 (front panel is unlocked), you must
first switch to mode 2, then from mode 2 to mode 0.

Summary of Contents for DXP HD 4K Series





























































Search results

Summary of Contents for DXP HD 4K Series

Reviews:

Related manuals for DXP HD 4K Series

Brands by name

Popular brands

Extron electronics DXP HD 4K Series, Setup Manual

Search results

Summary of Contents for DXP HD 4K Series

Reviews:

Related manuals for DXP HD 4K Series

Brands by name

Popular brands