4.
Click
Update
to upgrade the firmware.
5.
Reboot the switch (refer to
Rebooting the Extricom Switch
on page 46).
"
The firmware upgrade file is GNU zipped (gzip). Some Internet browsers are
configured to automatically unzip files when downloading. Verify that this option is
disabled so that the upgrade file remains zipped after downloading.
Rebooting the Extricom Switch
You must reboot the switch to activate any changes you make to the switch configuration.
To reboot the Extricom switch:
1.
In the
Reboot Switch
section of the
Utilities
configuration page, click
Reboot
.
2.
A new screen opens, prompting you “Are you sure you want to reboot?”.
3.
Click
Reboot
to reboot.
Reconfigure Switch - Smart Configuration
Not every change in the Extricom switch’s configuration requires system reboot. Some parameters
can be changed and will take effect immediately. This button checks whether a full reboot is
required. In case reboot is not required, the update will take effect immediately.
Setting the Time and Date
Extricom system supports two ways of setting Date and Time (refer to
Figure 28
)
To manually set the time and date on your Extricom Switch:
1.
In the
Set Time & Date
tab of the
Utilities
configuration page, select
Manually
.
2.
Enter the time and date in the format hh:mm:ss dd-mm-yy.
3.
Click
Update
to save the configuration.
To set the time and date on your Extricom Switch using NTP protocol:
1.
In the
Set Time & Date
section of the
Utilities
configuration page, enter the time and date in the
format hh:mm:ss dd-mm-yy.
2.
Click
Update
to save the configuration.
The Extricom WLAN System User Guide
51
Summary of Contents for EXRE-10
