Extricom EXRE-10 User Manual Download Page 47

Page: 47 / 74

Advanced Configuration of the Extricom WLAN

Architecture

The advanced configuration page of Extricom WLAN includes two tabs:

Advanced

Rogue

Advanced Tab

The

Advanced

tab includes the capability to configure the following:

Redundancy parameters.

SNMP parameters.

In redundancy mode, two identical switches (H/W and configuration) are installed with the same
number of connected APs.

One of the switches is configured as the Main switch, while the second is in Stand-by mode, and

can switch over as soon as the switch-over conditions are met.

Stand-by

Main

Figure 18. Redundancy deployment

To configure the Advanced Features parameters:

Click

Advanced Features

in the navigation tree. The

Advanced

configuration page appears

(refer to

Figure 19

Select

Advanced

tab for configuring redundancy and/or SNMP parameters

Configure the redundancy, and SNMP parameters. Refer to

Table 11

for a description of the

Advanced Features configuration information.

The Extricom WLAN System User Guide

Summary of Contents for EXRE-10











































































Search results

Summary of Contents for EXRE-10

Reviews:

Related manuals for EXRE-10

Brands by name

Popular brands

Extricom EXRE-10, User Manual

Search results

Summary of Contents for EXRE-10

Reviews:

Related manuals for EXRE-10

Brands by name

Popular brands