manualshive.com logo in svg

Extreme Networks ExtremeWare XOS 11.1, Manual

Get your hands on the Extreme Networks ExtremeWare XOS 11.1 manual for free download. This essential user guide provides detailed instructions on optimizing your network performance. Download the manual from manualshive.com and unleash the full potential of your Extreme Networks equipment.

Share
Download
background image

 

ExtremeWare XOS 11.1 Concepts Guide

475

Index of Commands

C

check policy, 180
clear access-list counter, 190
clear counters, 142, 247
clear inline-power stats ports, 113
clear log counters, 142
clear session, 35, 50
clear slot, 79, 434
clear vlan dhcp-address-allocation, 239
configure access-list, 181
configure account, 35
configure banner, 35
configure bgp add aggregate-address, 404
configure bgp add network, 408
configure bgp delete network, 408
configure bgp import-policy, 182
configure bgp neighbor dampening, 406
configure bgp neighbor no-dampening, 406
configure bgp neighbor peer-group, 405
configure bgp neighbor route-policy, 182
configure bgp peer-group dampening, 406
configure bgp peer-group no dampening, 406
configure bgp peer-group route-policy, 182
configure bootprelay add, 378
configure bootprelay delete, 378
configure cli max-sessions, 44
configure core-dumps, 444
configure diffserv examination code-point, 213
configure diffserv replacement, 214
configure dns-client add, 41
configure dns-client default-domain, 41
configure dos-protect acl-expire, 241
configure dos-protect interval, 240
configure dos-protect trusted-ports, 241
configure dos-protect type l3-protect 
alert-threshold, 241
configure dos-protect type l3-protect 
notify-threshold, 241
configure dot1p type, 210
configure eaps add control vlan, 277
configure eaps add protect vlan, 278
configure eaps failtime, 276
configure eaps failtime expiry-action, 276
configure eaps fast-convergence, 278
configure eaps hellotime, 276
configure eaps mode, 275
configure eaps primary port, 277

configure eaps secondary port, 277
configure eaps shared-port domain, 285
configure eaps shared-port mode, 285
configure eaps shared-port segment-timeout, 285
configure edp advertisement-interval, 95
configure elrp-client one-shot, 441
configure elrp-client periodic, 441
configure esrp add master, 337
configure esrp add member, 338
configure esrp add track-environment failover,
339
configure esrp add track-iproute, 340
configure esrp add track-ping, 340
configure esrp add track-vlan, 340
configure esrp delete elrp-poll ports, 347
configure esrp delete master, 338, 439
configure esrp delete member, 338
configure esrp delete track-iproute, 340
configure esrp delete track-ping, 340
configure esrp delete track-vlan, 340
configure esrp domain-id, 330, 337
configure esrp election-policy, 334, 339
configure esrp elrp-master-poll disable, 347
configure esrp elrp-premaster-poll disable, 347
configure esrp elrp-premaster-poll enable, 346
configure esrp mode, 329
configure esrp port-mode ports, 344
configure esrp ports mode, 343
configure esrp ports no-restart, 342
configure esrp ports restart, 342
configure esrp timer premaster, 333
configure failsafe-account, 40
configure fdb agingtime, 177
configure firmware installation, 431
configure igmp snooping add static group, 412
configure igmp snooping add static router, 412
configure igmp snooping delete static group, 412
configure igmp snooping delete static router, 412
configure igmp snooping filter, 412
configure inline-power budget slot, 105, 110
configure inline-power disconnect-precedence,
106, 111
configure inline-power label ports, 113
configure inline-power operator-limit ports, 108,
112
configure inline-power priority ports, 106, 111
configure inline-power usage-threshold, 107, 112
configure iparp add proxy, 368

Summary of Contents for ExtremeWare XOS 11.1

















































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ExtremeWare XOS 11.1

M-Audio NRV10 User Manual preview
NRV10
Brand: M-Audio Pages: 32
Palm SmartOffice SmartOffice Mobile User Manual preview
SmartOffice SmartOffice Mobile
Brand: Palm Pages: 29
Alpha Moisture Systems SADPmini Logger Instruction Manual preview
SADPmini Logger
Brand: Alpha Moisture Systems Pages: 14
Brocade Communications Systems Brocade 8/12c Installation Manual preview
Brocade 8/12c
Brand: Brocade Communications Systems Pages: 47
Xerox Phaser 340 Installer Installation preview
Phaser 340 Installer
Brand: Xerox Pages: 2
ZyXEL Communications NetAtlas Workgroup User Manual preview
NetAtlas Workgroup
Brand: ZyXEL Communications Pages: 242
EverFocus PowerVideo Plus User Manual preview
PowerVideo Plus
Brand: EverFocus Pages: 80
Mad Catz SharkPort PS2 Owner'S Manual preview
SharkPort PS2
Brand: Mad Catz Pages: 16
Autodesk AUTOCAD ELECTRICAL - Brochure preview
AUTOCAD ELECTRICAL -
Brand: Autodesk Pages: 16
Autodesk AutoCAD Driver Operation Manual preview
AutoCAD Driver
Brand: Autodesk Pages: 22
Autodesk 46304-050008-1600A - Vault R4 Essentials Aotc Implementation Manual preview
46304-050008-1600A - Vault R4 Essentials Aotc
Brand: Autodesk Pages: 140
Autodesk 00126-050008-1620A - Autocad 2006 Essentials User Manual preview
00126-050008-1620A - Autocad 2006 Essentials
Brand: Autodesk Pages: 235
PressReader Android Tablet Software User Manual preview
Android Tablet Software
Brand: PressReader Pages: 4
Novell EDIRECTORY 8.8 SP1 Installation Manual preview
EDIRECTORY 8.8 SP1
Brand: Novell Pages: 150
IBM PERFORMANCE MANAGEMENT FOR POWER SYSTEMS - GRAPH REFERENCE DOCUMENT... Reference preview
PERFORMANCE MANAGEMENT FOR POWER SYSTEMS - GRAPH REFERENCE DOCUMENT...
Brand: IBM Pages: 109
Xerox DocuColor 242 User Manual preview
DocuColor 242
Brand: Xerox Pages: 32
Xerox WorkCentre Pro 232 Driver Manual preview
WorkCentre Pro 232
Brand: Xerox Pages: 64
ADS Technologies USBAV-701 Install Manual preview
USBAV-701
Brand: ADS Technologies Pages: 12

Brands by name

Popular brands

Load more brands