Extreme Networks ExtremeWare XOS 11.1, Manual

Page: 162 / 496

Virtual LANs
ExtremeWare XOS 11.1 Concepts Guide
162
untagged ports to a new VLAN without first deleting them from the default VLAN, because the new
VLAN uses a protocol other than the default protocol.
create vlan ipsales
configure ipsales protocol ip
configure ipsales add port 5:6-5:8,6:1,6:3-6:6
The following modular switch example defines a protocol filter, myprotocol and applies it to the VLAN
named myvlan . This is an example only, and has no real-world application.
create protocol myprotocol
configure protocol myprotocol add etype 0xf0f0
configure protocol myprotocol add etype 0xffff
create vlan myvlan
configure myvlan protocol myprotocol
Displaying VLAN Settings
NOTE
The Aspen 8810 switch does not support user-created virtual routers.
To display VLAN settings, use the following command:
show vlan {detail |<vlan_name> {stpd}}
The
show
command displays summary information about each VLAN, which includes:
●
Name
●
VLANid
●
How the VLAN was created
●
IP address
●
Virtual router that VLAN belongs with
●
IPX address (if configured).
●
STPD information
●
Protocol information
●
QoS profile information
●
Ports assigned
●
Tagged/untagged status for each port
●
How the ports were added to the VLAN
●
Number of VLANs configured on the switch
Use the
detail
option to display the detailed format.