Extreme Networks ExtremeWare XOS 10.1, Manual

Page: 27 / 256

Configuring Management Access
ExtremeWare XOS 10.1 Concepts Guide 27
Configuring Management Access
ExtremeWare XOS supports the following two levels of management:
• User
•
Administrator
In addition to the management levels, you can optionally use an external RADIUS server to provide CLI
command authorization checking for each command. For more information on RADIUS, see “RADIUS
Client” in Chapter 3.
User Account
A user-level account has viewing access to all manageable parameters, with the exception of:
• User account database.
•
SNMP community strings.
A user-level account can use the
ping
command to test device reachability, and change the password
assigned to the account name. If you have logged on with user capabilities, the command line prompt
ends with a (>) sign. For example:
BD-1.2 >
Administrator Account
An administrator-level account can view and change all switch parameters. It can also add and delete
users, and change the password associated with any account name. The administrator can disconnect a
management session that has been established by way of a Telnet connection. If this happens, the user
logged on by way of the Telnet connection is notified that the session has been terminated.
If you have logged on with administrator capabilities, the command line prompt ends with a (#) sign.
For example:
BD-1.18 #
Prompt Text
The prompt text is taken from the SNMP
sysname
setting. The number that follows the colon indicates
the sequential line/command number.
unconfigure switch {all} Resets all switch parameters (with the exception of defined
user accounts, and date and time information) to the factory
defaults.
If you specify the keyword
all
, the switch erases the
currently selected configuration image in flash memory and
reboots. As a result, all parameters are reset to default
settings.
Table 5: Common Commands (continued)
Command Description