Extreme Networks ExtremeWare XOS 10.1, Manual

Page: 111 / 256

Event Management System/Logging
ExtremeWare XOS 10.1 Concepts Guide 111
will be similar to the following:
Comp SubComp Condition Severity Occurred In Notified
------- ----------- ----------------------- ------------- -------- -- --------
STP InBPDU Drop Error 0 Y 0
Occurred : # of times this event has occurred since last clear or reboot
Flags : (*) Not all applications responded in time with there count values
In(cluded): Set to Y(es) if one or more targets filter includes this event
Notified : # of times this event has occurred when ’Included’ was Y(es)
Displaying Debug Information
By default, a switch will not generate events of severity
Debug-Summary
,
Debug-Verbose
, and
Debug-Data
unless the switch is in debug mode. Debug mode causes a performance penalty, so it
should only be enabled for specific cases where it is needed. To place the switch in debug mode, use the
following command:
enable log debug-mode
After debug mode has been enabled, any filters configured for your targets will still affect which
messages are passed on or blocked.