Extreme Networks ExtremeWare XOS 10.1, Manual

Page: 63 / 256

Types of VLANs
ExtremeWare XOS 10.1 Concepts Guide 63
Spanning Switches with Port-Based VLANs
To create a port-based VLAN that spans two switches, you must do two things:
1 Assign the port on each switch to the VLAN.
2 Cable the two switches together using one port on each switch per VLAN.
Figure 2 illustrates a single VLAN that spans a BlackDiamond switch and another Extreme switch. All
ports on the BlackDiamond switch belong to VLAN Sales. Ports 1 through 29 on the other Extreme
switch also belong to VLAN Sales. The two switches are connected using slot 8, port 4 on system 1 (the
BlackDiamond switch), and port 29 on system 2 (the other switch).
Figure 2: Single port-based VLAN spanning two switches
To create multiple VLANs that span two switches in a port-based VLAN, a port on system 1 must be
cabled to a port on system 2 for each VLAN you want to have span across the switches. At least one
port on each switch must be a member of the corresponding VLANs, as well.
Figure 3 illustrates two VLANs spanning two switches. On system 2, ports 25 through 29 are part of
VLAN Accounting; ports 21 through 24 and ports 30 through 32 are part of VLAN Engineering. On
system 1, all port on slot 1 are part of VLAN Accounting; all ports on slot 8 are part of VLAN
Engineering.
System 1
System 2
EX_061
Sales