Extreme Networks BlackDiamond 12800 Series, Hardware Installation Manual

Page: 82 / 160

Installing Power Supply Units
BlackDiamond 12800 Series Switches Hardware Installation Guide
82
Figure 45: Extreme Networks 700/1200 W AC PSU with Locking Handle Open
3
Carefully slide the Extreme Networks 700/1200 W AC PSU all the way into the power supply bay
(see
Figure 46 ).
CAUTION
Do not slam the Extreme Networks 700/1200 W AC PSU into the system switch backplane. Use the locking handle
to secure the Extreme Networks 700/1200 W AC PSU into the system switch.
Figure 46: Inserting the 700/1200 W AC PSU into the Power Supply Bay
4 Secure the Extreme Networks 700/1200 W AC PSU in the power supply bay by pushing down on
the locking handle until it clicks into place.
5 Connect the AC power supply cord:
a If you are just replacing a power supply, you do not need to unplug the AC power cord.
EX_015
EX_011