Extreme Networks BlackDiamond 12800 Series, Hardware Installation Manual

Page: 28 / 160

BlackDiamond 12800 Series Modules
BlackDiamond 12800 Series Switches Hardware Installation Guide
28
XM-2HR I/O Module
Figure 13 shows the XM-2HR I/O module.
Figure 13: XM-2HR I/O Module
The XM-2HR I/O module has 10 SFP ports and 10 autosensing 10/100/1000BASE-T ports that use
standard RJ-45 connectors. In addition, it has one unpopulated XENPAK-based 10-Gigabit Ethernet port.
The default configuration of the XM-2HR I/O module is as follows. All ports:
●
Are added to the default VLAN as untagged.
●
Inherit the properties of the default VLAN (for example, protocol type and VLANid).
In addition, the 10/100/1000BASE-T ports and SFP ports operate in autonegotiation mode.
XM-2HR LEDs
The XM-2HR I/O module has the following LEDs:
●
Module status
●
Module diagnostics
●
Port status
Module status
LEDs
10 Gbs ports
BD_167
10/100/1000BASE-T ports
Mini-GBIC
fiber ports