- 60 -
9. Fuel Tank
Fuel unit removal
Open the seat.
Remove the center cover above fuel tank.
Remove left side cover
Remove fuel unit (4 bolts).
Caution
Do not bend the float arm of fuel unit
Do not fill out too much fuel to fuel tank.
Fuel unit inspection (Refer to electrical
equipment chapter 17).
Fuel unit installation
Install the gauge in the reverse order of
removal.
Caution
Do not forget to install the gasket of fuel unit
or damage it.
Fuel tank removal
Open the seat.
Remove the front upper cover and center
cover.
Remove the side covers R/L.
Remove the front cover.
(Covers remove please refer chapter 13)
Disconnect fuel unit couple.
Remove the fuel hose.
Remove fuel tank front and rear side 4 bolts,
and then remove fuel tank.
Installation
Install the tank in the reverse order of
removal
.
4 bolts
Fuel tube
Front
Rear
Summary of Contents for Patriot 430
