Explorer Patriot 430, Service Manual

Page: 15 / 235

- 14 -
When separating a connector, it locker has to Insert the terminal completely, unlocked it first. Then,
conduct the service Check if the terminal is covered by the boot. Do not let boot open facing up.
Do not pull the wires as removing a connector or wires. Hold the connector body.
Make sure if the connector pins are bent, extruded or loosen.
Insert the connector completely. If there are two lockers on two connector sides, make sure the
lockers are locked in properly. Check if any wire loose.
Check if the connector is covered by the twin connector boot completely and secured properly.