9. Suspension Arm
Remove
Remove front wheel, wheel hub, and brake
caliper, brake disk, tie-rod, knuckle and front
cushion.
Loosen upper suspension arm nuts, remove
swing arm bolts.
Remove upper suspension arm.
Loosen under suspension arm nuts, remove
swing arm bolts.
Remove under suspension arm.
Inspection
Inspect the suspension arm, ball joint and
bush for damage or bending.
Installation
Install in reverse order of removal procedures.
Torque value:
Suspension arm nut 70 N-m
Lubricate with grease into suspension arm.
Suspension arm nuts and bolts
Suspension arm nuts and bolts
Summary of Contents for Patriot 430
