Explorer Patriot 430, Service Manual

Page: 40 / 235

- 39 -
Brake Lining Wear
The indent mark on brake lining is the wear
limitation.
Replace the brake lining pad if the wear limit
mark closed to the edge of brake disc.
Caution
To check front brake lining must be remove
front wheel first.
It is not necessary to remove brake hose
when replacing the brake lining.
Brake Pads Replacement (refer
chapter 14)
Make sure the brake lining condition.
Replace the lining pads if the brake lining
wear limitation groove close to the brake disc.
Caution
Do not operate the brake lever after the
clipper removed to avoid clipping the brake
lining. In order to maintain brake power
balance, the brake pads must be replaced
with one set.
13. Brake Light Switch/Starting
Inhibitor Switch
The brake light switch is to light up brake light
as brake applied.
Make sure that electrical starter can be
operated only under brake applying.