Check reserve tank
Remove the front center cover, and then
remove reserve tank filler cap.
Check the liquid level in the front fender right
side. Add coolant to proper level if too low.
Reinstall the reserve tank filler cap.
Caution
The reserve tank liquid level cannot too high,
to avoiding overheats of the water
temperature of the cooling system.
Radiator
Check
Remove the front center cover, side covers
and front fender. (Refer chapter 13), check for
any leakage from weld seam.
Blow radiator clean using compressed air. If
the radiator is blocked by dirt, use low
pressure water jet to clean it.
Care shall be taken when straightening the
sink fan.
Removal
Place a water pan under the water pump;
loosen the drain bolt to drain out the coolant.
Remove coolant filler pipe.
Upper
Lower
Radiator filler cap
Revers tank cap
Filler pipe clamp
Summary of Contents for Patriot 430
