REASSEMBLY
Hook the spiral spring end
Ⴜ
,
1
with the
recoil
starter case.
WARNING
Apply grease to the spiral spring.
Turn the starter rope on the reel properly.
Engage the part
Ⴜ
,
2
of the reel with the
spiral spring end
Ⴜ
,
3
.
Hook the rope onto the hook part
Ⴜ
,
4
of the
reel, turn thereel clockwise 5 times with the
rope.
Install the ratchet related parts.
NOTE:
Apply the shaft and ratchet with grease.
Pull the rope and check that the ratchet is
pushed out.
Wear eye and hand protector when
reassembly the reel, because the spring
may quickly unwind and cause an injury.
Summary of Contents for Patriot 430
