Exmark Laser Z LZ18KC523 Page 11 Operator'S Manual Download

Page: 11 / 70

- 6 -

1.5.4

Store fuel in a container specifically designed for this purpose in a cool, dry place.

1.5.5

Keep the mower and fuel container in locked storage to prevent children from

playing or tampering with them.

1.5.6

Gasoline powered equipment or fuel containers should not be stored in a basement
or any enclosed area where open pilot lights or heat appliances are present.

1.5.7

Maximum mowing results and safety can only be achieved if the mower is

properly maintained and operated correctly.

1.5.8

Check all bolts frequently to maintain proper tightness.

1.5.9

Keep all guards, shields and all safety devices in place and in safe working
condition.

1.5.10

Frequently check for worn or deteriorating components that could create a hazard.

1.5.11

All replacement parts must be the same as or equivalent to the parts supplied as
original equipment.

WARNING

POTENTIAL HAZARD

♦

Hydraulic fluid escaping under pressure can penetrate

skin and cause injury.

WHAT CAN HAPPEN

♦

Fluid accidentally injected into the skin must be

surgically removed within a few hours by a doctor
familiar with this form of injury or gangrene may result.

HOW TO AVOID THE HAZARD

♦

Make sure all hydraulic fluid hoses and lines are in

good condition an all hydraulic connections and fittings
are tight before applying pressure to hydraulic system.

♦

Keep body and hands away from pinhole leaks or

nozzles that eject high pressure hydraulic fluid.

♦

Use cardboard or paper to find hydraulic leaks.

♦

Safely relieve all pressure in the hydraulic system

before performing any work on the hydraulic system.

For Kawasaki Liquid-Cooled units:

WARNING

POTENTIAL HAZARD

♦

Engine coolant is hot and pressurized.

♦

Radiator and surrounding parts are hot.

WHAT CAN HAPPEN

♦

Spray or steam from hot, pressurized liquid in the

engine cooling system and touching a hot radiator
may cause severe burns.

HOW TO AVOID THE HAZARD

♦

Allow the engine to cool completely before removing

the radiator cap or servicing any component of the
cooling system.

Summary of Contents for Laser Z LZ18KC523







































































Search results

Summary of Contents for Laser Z LZ18KC523

Reviews:

Related manuals for Laser Z LZ18KC523

Brands by name

Popular brands

Exmark Laser Z LZ18KC523, Operator'S Manual

Search results

Summary of Contents for Laser Z LZ18KC523

Reviews:

Related manuals for Laser Z LZ18KC523

Brands by name

Popular brands