Exmark Laser Z LZ18KC523 Operator'S Manual Download Page 22

Page: 22 / 70

- 17 -

3.2.5

Place battery on a level surface and remove vent caps.

DANGER

POTENTIAL HAZARD

♦

Battery electrolyte contains sulfuric acid, which is

poisonous and can cause severe burns

WHAT CAN HAPPEN

♦

Swallowing electrolyte can be fatal or if it touches skin

can cause severe burns.

HOW TO AVOID THE HAZARD

♦

Wear safety glasses to shield eyes, and rubber gloves

to protect skin and clothing when handling electrolyte.

♦

Do not swallow electrolyte.

♦

Fill the battery where clean water is available for

flushing skin.

DANGER

POTENTIAL HAZARD

♦

Charging the battery may produce explosive gasses

WHAT CAN HAPPEN

♦

Battery gasses can explode causing serious injury.

HOW TO AVOID THE HAZARD

♦

Keep sparks, flames, or cigarettes away from battery.

♦

Ventilate when charging or using battery in an

enclosed space.

♦

Make sure venting path of battery is always open once

battery is filled with acid.

3.2.6

Fill cells with battery grade sulfuric acid (1.265 specific gravity) to halfway
between top of separators and bottom of vent well.

3.2.7

Let battery stand for 1/2 hour after filling. If battery acid level has fallen, refill to
level above plates.

3.2.8

Charge the battery at 4 to 5 amps for 3-5 hours.

3.2.9

After charging, install vent caps and wash off any acid with water and dry battery.

CAUTION

POTENTIAL HAZARD

♦

If the ignition is in the “ON” position there is potential

for sparks and engagement of components.

WHAT CAN HAPPEN

♦

Sparks could cause an explosion or moving parts

could accidentally engage causing personal injury.

HOW TO AVOID THE HAZARD

♦

Be sure ignition switch is in the “OFF” position.

Summary of Contents for Laser Z LZ18KC523







































































Search results

Summary of Contents for Laser Z LZ18KC523

Reviews:

Brands by name

Popular brands

Exmark Laser Z LZ18KC523, Operator'S Manual

Search results

Summary of Contents for Laser Z LZ18KC523

Reviews:

Brands by name

Popular brands