Frequency Tests
224
MAX-635G
WB Attenuation
WB Attenuation Threshold Settings
The
Threshold Settings
page allows you to set the
WB Attenuation
threshold values for the test.
Attenuation
sets up the good attenuation
threshold parameters.
Type
is the threshold limit for each pair. Selecting
Minimum
or
Maximum
acts as the single point
pass/fail threshold
flat
mask while selecting
Mask
provides a
shaped
mask as threshold. When
Mask
is selected, it will be used as pass/fail criteria next
time the test is run.
Enabled
is a flag to use the existing threshold:
either
Yes
or
No
. For example, setting the threshold
Enabled
to
No
will
disable pass/fail threshold.
To set threshold values:
1.
Press the up/down arrow keys to highlight the desired parameter.
2.
Press the left/right arrow keys to view and select the options.
OR
3.
Press
on a value to open a list box of options or the alphanumeric
editor screen and use the navigation keys to scroll through.
4.
Press
to confirm the value.
Summary of Contents for MAX-635G
