EXFO MAX-635G, User Manual

Page: 320 / 451

Copper Auto Tests
310
MAX-635G
User Auto Test
Noise Result Graph
The Noise Result Graph page displays the pass/fail
status and results in graphical format for the following
noise tests:

Power Influence
measures the effects that 50 Hz
and 60 Hz powerline (AC Mains) interference has
on the circuit under test.

WB PSD Noise - Max PSD and frequency and RMS
Noise
values differentiating the
Current
trace
from the Peak hold. This test can be viewed in
Landscape Mode
.
To select a test:
1.
In the Select Test parameter, press the left/right arrow keys to view and
select the options.
OR
2. Press on a value to open a list box of options and press the
up/down arrow keys to highlight the desired test.
3. Press to confirm the test.

Select Graph button changes to Graph Selected when pressed and
opens a new selection of function keys which allow you to maneuver
the graph as follows:

Cursor
- press the left/right arrow keys to decrease/increase the
values by moving the cursor. Press and hold the left/right arrow
keys to accelerate the cursor. Press
to recall the cursor and
place it in the middle of the current x-axis limits.

Zoom
references the middle of the x/y axis and
not
the cursor
position. Press the arrow keys as follows:
Right = x-axis zoom in.
Left = x-axis zoom out.