EXFO MAX-635G User Manual Download Page 310

Page: 310 / 451

Copper Auto Tests

300

MAX-635G

POTS Auto Test

POTS Auto Test Threshold Settings

The

Threshold Settings

page allows you to set the

POTS Auto Test Threshold Settings

for the

combination of multiple tests. The threshold values do
not come from individual tests but are unique to
POTS.



Loop DC Current

sets the DC current value for

the wire pair.



Loss

sets the loss value for the wire pair.



Power Influence

sets the power influence value

for the test.



VF Noise

sets the level of voice frequency noise to be used.



VF/AC Balance (Active)

sets the VF/AC longitudinal balance value for

active mode.



Type

is a read-only field displaying the threshold limit: either

Minimum

Maximum



Enabled

is a read-only field and always

Yes

for all thresholds.

To set threshold values:
1.

Press the up/down arrow keys to highlight the desired parameter.

Press

on a value to open the alphanumeric editor screen and use

the navigation keys to scroll through.

Press

to select each value and use the function keys to complete

your selection.

Press

to confirm and close your selections.

Summary of Contents for MAX-635G




































































































































































































































































































































































































































































Search results

Summary of Contents for MAX-635G

Reviews:

Related manuals for MAX-635G

Brands by name

Popular brands

EXFO MAX-635G, User Manual

Search results

Summary of Contents for MAX-635G

Reviews:

Related manuals for MAX-635G

Brands by name

Popular brands