manualshive.com logo in svg

EXFO FTV-700 series, User Manual

Share
Download
EXFO FTV-700 series User Manual Download Page 78

Testing Fibers in Template Mode (optional)

68

FTB-700 Series

Selecting a Reference Trace

Selecting a Reference Trace

In 

Template OTDR

 mode, you can only select a file as a reference trace. 

This operation is closely related to opening a trace file. All the traces, will 
be displayed using the zoom and markers settings saved along with the 
reference trace file (see

Opening Trace Files

 on page 155).

Note:

The following procedure will be useful if you 

did not select a reference 

trace file

 when the 

Open Reference Trace File 

dialog box appeared during 

the activation of Template OTDR mode or if you want to use another 
reference trace.

To select a reference trace:
1.

From the 

Main Menu

 window, press 

Storage

, then 

Open Reference

.

2.

If necessary, select the storage location from where you want to open 
the file.

3.

Select the file to be used as a reference and press

 OK

.

The application opens the selected trace file automatically.

Summary of Contents for FTV-700 series








































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands