manualshive.com logo in svg

EXFO FTV-700 series, User Manual

Share
Download
EXFO FTV-700 series User Manual Download Page 204

Analyzing Traces with the Bidirectional Analysis Application (Optional)

194

FTB-700 Series

Creating Bidirectional Measurement Files

The A->B and B->A traces must respect the following criteria:

Note:

The information such as the Cable ID and Fiber ID does not need to be the 
same in the A

->

B and B

->

A files for the application to be able to generate 

the bidirectional measurement. 

Item

To be valid...

Trace

³

Both must be unidirectional files (.trc or .sor files).

³

Only traces of native format or of Telcordia 

(Bellcore) EXFO version 200 format can be 

reanalyzed and be used to generate the 

bidirectional measurement.

³

You can open traces of Telcordia (Bellcore) 

non-EXFO version 200 format, but you cannot 

reanalyze them. However, they can be used to 

generate the bidirectional measurement.

Pulse width

Must be identical or adjacent for both traces. 

Pulses can be considered as adjacent when 

(for example, 2.5

μ

s and 10

μ

s are adjacent, because 10 

is equal to 2.5 x 4).

Fiber types

Use only traces acquired using 

singlemode

 fibers.

Acquisition offset Must be set to zero for both traces.
Wavelengths

At least one wavelength must be common to both trace 

files. Only the wavelengths that are common to both 

traces will be used to generate the bidirectional 

measurement and will be saved along with the 

bidirectional file.

biggest pulse 4 smallest  pulse

×

≤

Summary of Contents for FTV-700 series








































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands