manualshive.com logo in svg

EXFO FTV-700 series, User Manual

Share
Download
EXFO FTV-700 series User Manual Download Page 218

Analyzing Traces with the Bidirectional Analysis Application (Optional)

208

FTB-700 Series

Viewing Results

Trace Info. Tab

You can view information about the bidirectional measurement as well as 
the A->B and B->A traces (see 

Displaying Traces and Bidirectional 

Measurement

 on page 198). However, you can only modify the analysis 

settings for the current A->B and B->A traces, not for the bidirectional 
measurement (see

Modifying Trace Analysis Settings

 on page 248).

To view information about the bidirectional measurement or a 

specific trace:
1.

From the main window, select the 

Trace Info.

 tab.

2.

Under 

Direction

, select the desired direction.

Summary of Contents for FTV-700 series








































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands