manualshive.com logo in svg

EXFO FTV-700 series, User Manual

Share
Download
EXFO FTV-700 series User Manual Download Page 262

Analyzing Traces with the Bidirectional Analysis Application (Optional)

252

FTB-700 Series

Modifying Trace Analysis Settings

To revert to default settings:
1.

From the main window, select the 

Trace Info.

 tab.

2.

Under 

Direction

, select either 

A->B

 or 

B->A

.

3.

Press the 

Trace Analysis Settings

 button.

4.

Press the 

Revert to Default Settings

 button.

5.

When the application prompts you, select 

Yes

 to complete the 

operation.

6.

Press 

Apply 

to confirm the changes.

7.

The application may prompt you to confirm whether you want to apply 
the changes to both unidirectional traces. Select the option that better 
suits your needs.

8.

Press 

OK

 to return to the 

Trace Info.

 tab.

Summary of Contents for FTV-700 series








































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands