manualshive.com logo in svg

EXFO FTV-700 series, User Manual

Share
Download
EXFO FTV-700 series User Manual Download Page 164

Analyzing Traces and Events

154

FTB-700 Series

Swapping Traces

Swapping Traces

Note:

This function is available in Advanced mode only.

Since the events table and the trace information are based on the main 
trace, you may want to interchange main and reference traces.

When you swap traces, the application will provide a new set of events 
corresponding to the new main trace.

To swap traces:
1.

From the button bar, press 

Storage

.

2.

From the 

Storage 

dialog box, select 

Swap Main/Reference

.

Note:

You can change a main trace into a reference trace, and vice versa, even if 
only one trace is in the application’s memory.

Summary of Contents for FTV-700 series








































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands