manualshive.com logo in svg

EXFO FTV-700 series, User Manual

Share
Download
EXFO FTV-700 series User Manual Download Page 120

Analyzing Traces and Events

110

FTB-700 Series

Measure Tab

Measure Tab

The application shows two, three or four markers: 

a

, 

A

, 

B

, and

b

, 

depending on the button you pressed under 

Results

.

These markers can be repositioned along the trace to calculate loss, 
attenuation, reflectance, and optical return loss (ORL).

You can reposition all markers by using the controls in the 

Markers

 section. 

You can drag them directly from the trace display. You can also move the 
markers using the left/right arrows. Selecting marker

A

 or

B

 will move the 

a

-

A

 or 

B

-

b

 pair.

For more information on how to perform manual measurements, 
see

Analyzing the Results Manually

 on page 159.

Trace Info. Tab

The information about all the trace files (including the reference) can be 
displayed.

You can view all of the traces, in turn, in both the 

Trace Info

 pane and the 

trace display with the navigation buttons. For more information, see 

Displaying or Hiding a Trace

 on page 124.

Summary of Contents for FTV-700 series








































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands