manualshive.com logo in svg

EXFO FTV-700 series, User Manual

Share
Download
EXFO FTV-700 series User Manual Download Page 153

Analyzing Traces and Events

OTDR

143

Changing the Attenuation of Fiber Sections

3.

Position markers as desired to modify the attenuation value. For more 
information on positioning markers, see 

Using Markers

 on page 161.

Note:

The markers serve only to set the new attenuation value. Their actual 
locations will not be modified.

Fiber section loss and attenuation are displayed respectively in the 

Loss (LSA)

 and 

Att. (LSA) 

boxes.

4.

Press 

OK

 to accept the modifications you have made or

 Cancel

 to 

return to the events table without saving the changes.

The modified fiber sections are identified with “*” in the events table 
as shown below.

Loss and attenuation 

values

Summary of Contents for FTV-700 series








































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands