Setup
91
27891EN-900-02 / Edition 02/2017
3. Swivel in latch (
c
) and latch (
d
) successively.
4. Secure both latches successively with Allen screwdriver.
10.14.
MOUNTING HOPPER FOR WORKING WIDTH
170 MM
Allen screwdriver 6 mm
NOTE
Roller destruction due to incorrect input of the working width (E-models)
›
In general, program the working width of the used safety device via the
operating unit. Else the line force values [N/mm] will not correspond.
Danger of roller destruction in force mode.
The hopper base (
a
) 170 mm is mounted the same way as other
safety devices for the nip gap. In addition, the safety guard (
b
) is
mounted to the hopper. The safety guard can be dismounted for
easier cleaning.