Setup
87
27891EN-900-02 / Edition 02/2017
10.12.
MOUNTING PLASTIC GUIDES FOR WORKING
WIDTH 200 MM
Allen screwdriver 4 mm
NOTE
Roller destruction due to incorrect input of the working width (E-models)
›
In general, program the working width of the used safety device via the
operating unit. Else the line force values [N/mm] will not correspond.
Danger of roller destruction in force mode.
Leaks in product flow at working width 200:
The plastic guides have a blue (left plastic guide) or black screw
connection, respectively. The plastic guides wear differently. In
order to avoid leaks, the plastic guides must always be used on the
same side.
›
Observe the color coding
blue
(left) and
black
(right).
›
Replace worn plastic guides.
The plastic guides for the working width 200 mm consist each of the following
units:
Plastic guide shoulder roller (
a
), wear parts
Top for shoulder guide (
b
) / top for shoulder guide, hopper (
b.1
)
The tops (
b
) are each screwed onto the plastic guides (
a
) (wear part) (
c, d
)
and (
c, e
). The
blue
screw (
d
) or the
black
screw (
e
) help to insert the
plastic guides on the correct side into the machine
Also at the machine are a blue and a black screw on the left and right
central mount, respectively, that can be used as side orientation.
Left machine side:
blue
Right machine side:
black
Clamping cone for shoulder guide (
f
).