Setup
76
27891EN-900-02 / Edition 02/2017
10.4. PUTTING ON THE KNIFE GUARD
The knife guard for the scraper socket protects from cuts during:
›
Removing the scraper socket and putting it into place
›
Storing the scraper socket
›
Mixing operation while the scraper is swiveled off
For rapid access, the knife guard can be fastened with magnets on the machine
while it is not in use.
CAUTION
Danger of cuts at the scraper knife.
›
During assembly and handling, always work with plastic knife
protection or with knife protection for scraper socket.
›
When working with the scraper socket and scraper knife, wear
suitable safety gloves.
Fig. 45: Mounting knife guard for scraper socket
Fig. 46:
Knife guard in „park position
1. Push knife guard over the scraper socket slightly bending open the clamping
holder. While doing so, position the knife guard at the front edge of the
scraper socket and push on completely.