Setup
86
27891EN-900-02 / Edition 02/2017
Fig. 57: Plastic guide WW 85mm and 170mm: Assembling parts
1. Select guide shafts for the desired working width
2. Screw guide shaft (
b, c
) into plastic guide (
a
) hand-tight.
3. For
working with hopper
, additionally push the springs (
d
) onto the guide
shafts 170. The springs seal the guides against the hopper.
Fig. 58: Inserting plastic guides for working width 85 mm and 170 mm
(Shown here: working width 170 mm)
4. Insert guide shaft (
a
) into the hole of the guide tube (
b
).
5. Lift guide shaft slightly with index finger.
6. Push in plastic guide up to the stop.
b
c
d
a
a
a
b